GS3241
The GS3241 is a low-power, multi-rate re-timing Cable Equalizer supporting rates up to 3G HD-SDI. 它的目的是均衡和恢复信号接收超过200米的同轴电缆在3G, 补偿SMPTE病理信号的DC含量, 并重新计时输入的数据. 设备支持st424 (3G SDI), St 292-1 (hd-sdi), 和ST 259 (SD-SDI)信号,并针对2的性能进行了优化.97Gb/s. 除标准SMPTE费率外, 该设备还支持以270Mb/s和125Mb/s的速度重新定时DVB-ASI和MADI.
The two trace drivers have highly configurable pre-emphasis and swing controls to compensate for long trace and connector losses.
Features
- 75Ω带片上终端的电缆输入接口
- 符合SMPTE ST 424, ST 292-1和ST 259的输入/输出
- 从1Mb/s到2 mb /s的多标准操作.97Gb/s
- 除标准SMPTE费率外, 该设备还支持以270Mb/s的速度重新定时DVB-ASI, 和MADI在125Mb/s
- 3D输入信号眼监视器
- PRBS发生器和检查器
- 电缆自动均衡-百通1694A电缆的典型均衡电缆长度:
- 190m at 2.97Gb/s
- 260m at 1.485Gb/s
- 450m在270Mb/s和125Mb/s
- 电缆均衡器特点:
- 信号丢失时自动断电
- 可编程载波检测与静音阈值调整
- 不兼容源的可编程发射摆动补偿
- 手动和自动电缆均衡器旁路
- 跟踪驱动程序特性:
- 集成100Ω,差分输出终端
- E×tends输出直流耦合支持1.2V to 2.5V输出供电范围
- 跟踪驱动器数据输出预强调补偿高达60“FR4在2.97Gb/s
- 手动或自动重定时器旁路
- 手动或自动静音或禁用LOS
- CDR features:
- 手动或自动速率模式
- 宽环路带宽控制
- 以以下数据速率重新计时:125Mb/s, 270Mb/s, 1.485Gb/s, and 2.97Gb/s,这包括f/1.001 rates
- 附加功能:
- Single 1.8V模拟和数字核心电源
- GSPI串行控制和监控接口
- 四个可配置的GPIO引脚用于控制或状态监控
- 工作温度范围宽:-40℃~ +85℃
- 小型6mm × 4mm 40针QFN
- 无铅/无卤/符合RoHS和WEEE要求的封装
- 引脚兼容GS12141、GS12142、GS12241
SMPTE ST 424, SMPTE ST 292, SMPTE ST 259和AES10同轴电缆串行数字接口.
Applications
Pb(铅)无/ RoHS-Green信息
(-40°C至+85°C / 4000次循环)
(50°C, 4000 Hrs)
Explore a wealth of downloadable resources and datasheets to assist with prototyping and production.
Login or register for mySemtech to gain access to restricted product documentation and to add documents to your Watch List for update alerts
分销商/目录供应商库存
查看以下参与分销商的产品供应情况. 浏览所有分销商 here.
Part # | Country | Qty | Buy | Distributor |
---|
Resources
想看更多视频 Videos
在bluerriver应用程序博客系列的第五篇也是最后一篇文章中, 我们将看看Semtech的两条产品线- Semtech的 bluerriver®ASIC平台 for Pro AV and SDVoE™, and broadcast 串行数字接口(SDI) -可以启用一套独特的“SDI-over-IP”产品和应用.
bluerriver®应用程序第5部分:bluerriver &…
READ NOWWhether you are watching an action replay of a baseball game on a giant screen at a stadium, 在大屏幕电视上看电影或在笔记本电脑上播放视频, 高质量的视听(AV)体验总是值得期待的. Ultra-High-Definition Serial Digital Interface (UHD-SDI) and High-Definition Multimedia Interface (HDMI) are two standards for digital AV transmission. UHD-SDI standardizes the transmission of uncompressed and unencrypted digital AV signals over coaxial or fiber optic cables. HDMI是一种用于传输高清数据的数字接口, high-speed digital multi-track audio and uncompressed video signals from HDMI-compliant sources to AV displays. Even though they both can transport ultra-high-definition AV signals from a source to a display, HDMI更倾向于连接电脑等消费电子产品, gaming consoles, 蓝光/ DVD播放器, televisions, projectors, etc. UHD-SDI is preferred for high-end applications such as professional indoor/outdoor video production and television broadcasts because it supports long-range transmission and a rugged connection with the help of a physical lock mechanism at each end of the cable. UHD-SDI同轴电缆可以传输信号高达300英尺, 而HDMI电缆即使在50英尺内也会受到过度信号衰减的困扰. 这两个接口可以通过HDMI-SDI或SDI-HDMI转换器一起使用. For example, 如图1所示, an HDMI display would be used for confidence monitoring of an SDI stream to avoid the need to use specially calibrated SDI-specific displays.
READ NOW早在1996年,我就使用串行数字接口(SDI)设计了我的第一个产品, and little did I know that this fledgling coax-based video interface standard would dominate my career for the next 20+ years. Back then, SDI was limited to carrying Standard Definition (SD) digital video at 270 Megabits per second (Mbps), 但会发展到越来越高的数据速率,以承载高清720p, 1080i and 1080p, 以及最近的4K超高清视频, 电缆的长度被认为是不可能的. 低成本的单芯同轴铜电缆的便利性, capable of carrying 4K video up to 100m has meant that SDI has become the de facto AV connectivity of choice in markets such as broadcast, Pro AV, 医疗和监测.
READ NOW